I designed the Dallas Soars! Pegasus to…

30 Sep 2009

I designed the Dallas Soars! Pegasus to meet four major criteria. Safety, logistics, reproduction, and esthetics. Designing for any one of these is difficult at best, combining all four is monumental.


The statue was designed with children’s safety in mind. There would be no place for a child to be trapped within the legs or anywhere else. If a child tripped or fell against the base, it has a tapered slope to ease action and injury. The wings are straight over the back with the hollow between the wings filled so there would be no place for a child to sit or perch and possibly fall. And yet none of these features would prevent a complete tactile encounter with the public.


The statue needed to be portable, and yet when displayed needed to remain stationary. I accomplished this by using the rock or the base as a water tank. When empty the statue weighed about 150 pounds and could easily be moved by one man with a two wheel hand cart. When placed in position the base was filled with water and weighed approximately 700 pounds. This prevented strong winds and weak minds from moving it about.


This was possibly the most difficult part of designing this project and was necessary in order to control production cost. Both the flying and dancing Pegasus were designed to be reproduced in fiberglass. All fiberglass molds are rigid and can only be relieved straight out of each mold. There were a total of 15 molds made to produce each of the two Pegasus. A variety of jigs were also constructed in order to hold the molded parts in place for adhesion. Each Pegasus was constructed much in the same manner as one would build a corvette body. When designing for fiberglass reproduction, one must note, the fewer undercuts, the fewer molds, the fewer molds and jigs, the less production cost. Unfortunately, these projects seem to be more about the money than the art. I was determined to make the viewer unaware of this fact.


Pegasus is a flying horse, so I gave the horse bird-like features.

Birds have large chests and small stomachs. It’s just the opposite for horses. Bird’s nostrils are forward facing as is the Pegasus. Horse’s nostrils are on either side. Cranes leave the ground by bowing bones in their legs and springing upward. I think this is presented most elegantly in the back legs of the dancing Pegasus. The sparrows fold and tuck their legs in flight. Cranes leave their legs stretched straight out behind them. Horses cannot achieve either of these positions naturally.

But with a little artistic license both are represented quite gracefully in the flying Pegasus. Although you can see the shape of the muscles, the mane, feathers and tail and even the cuts in the rocks, it is sculpted in such a way to allow each artist’s brush to flow uninterrupted across every feature.

It was my desire to make the viewer believe this creature could fly, in hopes that their own imagination might soar.

If you would like a Pegasus for your company or yourself please contact me…


  • Roger - February 18, 2010

    I always loved the Pegasus when they first appeared in Dallas. I saw on another website that it might still be possible to get a blank one. Or maybe someone has a decorated one for sale?

  • Mary Tomas - February 22, 2010

    A client of our gallery is interested in purchasing a Pegasus. Are they still available or can a new one be made? More info is needed, thank you.


    Mary Tomas Studio Gallery

  • pontarae - February 22, 2010

    Thanks for your interest in the Pegasus!

    My understanding is that the Pegasi can still be created. I have, however, forwarded your question to Ken Robison for an authoritative reply. He will be calling you shortly at your gallery.

    Best regards,

    Dennis Foreman

  • pontarae - February 22, 2010

    Thanks for your interest in the Pegasus!

    Personally I’ve not seen decorated Pegasi for sale, however I do believe that Ken would be responsive to creating an additional Pegasus for you. Do call me or email your contact details to me and I will see that he responds promptly.

    Best regards,

    Dennis Foreman
    214 521-5626

  • Laura Malick Smith - April 16, 2010

    Hi Ken. I couldn’t find a direct email for you. I met you last night, 4/15/2010 at the Tea Party and took some photos of you for my classes at AAU. I just wanted to say it was really great meeting you and it’s incredible to meet the sculptor behind the Pegasus. It was one of the first things I remember about Dallas when I first moved here.

    I could send you some of the shots I took if you’re interested. You should have my email by posting here, so let me know. I’ll check back here to see what else you’re doing in art.

    Laura Malick Smith

  • Amy - June 4, 2010

    I always loved the Pegasus when they first appeared in Dallas. I saw on another website that it might still be possible to get a blank one. Or maybe someone has a decorated one for sale?

  • Holly Harvey - March 14, 2012

    We are totally interested in purchasing some pegasus horses – please email me asap!

  • Kristi - September 22, 2012

    I am trying to find out a little more background on the Pegasus sculptures. I know they were originally done for a charity project but not much else. Would Mr Robison be willing to answer a few questions for me? Or point me in the direction of someone who could?

    Thank you.

  • april warner - June 21, 2013

    I met with Ken awhile back for an office project I am working on. We are interested in getting a pegasus made for. can you provide his contact information? thanks

  • Graciela Kessler - July 11, 2013

    We would like to have the contact information of Ken Robison. Our intention is to have a Pegasus made for one of our projects.
    Please send me an e-mail ASAP.
    Thank you,
    Graciela Kessler

  • pontarae - July 11, 2013

    Sorry for the delay!

    Ken Robison can be reached at 214 418-7577.

    Thanks for your interest in the Pegasus.

    Dennis Foreman

Add comment